WOCA Colour Oil 120, Black, 2.5L



£107.04
per can, Inc. VAT
£89.20
per can, Ex. VAT
Can(s):

Product Variations


Description


Trade prices & discounts are available for this product in store only. Order by phone. This product is available with next Day Delivery, excluding Sundays, coverage includes London within M25.

Oil finishing and colouring in one application. Suitable for oak, ash, spruce, larch, pine and teak, as well as cork. WOCA Colour Oil 120, Black, 2.5L may be used on both unfinished or freshly sanded interior woodwork.

Preparation:

  • The floor or woodwork should be freshly sanded grain 100-120. Clean with 125 ml Wood Cleaner mixed with 5-litre water. The surface must be completely clean, dry, and free from grease before the application of the Colour Oil. Maximum humidity of the wood 12%, oil- and room temperature at least 18°C. Ensure good ventilation at all times during the application and drying time.
  • Shake the container with Colour Oil well before and during application.
  • Apply the oil in an even coat onto an area of approx. 15 m2 with a short-haired paint roller. Let the floor absorb the oil for approx. 20 min. Subsequently, the oil is worked into the wood with a yellow polishing pad either manually or for large areas with a floor machine. Polish for approx. 15 min. till the floor appears saturated with oil.
  • Beware! Should any excess oil appear on the surface, remove this with cloths or paper or scrape onto next section of floor to be oiled. Buff floor with white polishing pads and with lint-free cotton cloths under the floor machine.
  • The colour oiled floor is pre-hardened after approx. 6 hours at room temperature of 20°C and completely hardened after 5 days.
  • If a silk-mat surface is required, the finished floor may be buffed with 1 dl of Colour Oil to 10 m2 of the floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor.
  • Cover walking areas with corrugated cardboard for 5 days.
  • Clean with Natural Soap. Maintain with Maintenance Paste or Colour Oil, but first clean with Wood Cleaner.

Risk of self-ignition: Due to the risk of self-ignition it is important that sanding dust and oil wetted cloths are soaked in water and disposed of in a tightly closed container after use.

Storage: Store safely, out of reach of children Do not expose to heat (e.g. sunlight). Store frost-free. 

Disposal: Empty containers and residues to be disposed of according to local regulations. 

Declaration: Vegetable oil components, isoparaffin, pigments. Contains Cobalt bis (2-ethyl hexanoate) May produce an allergic reaction. 

VOC: This product contains a maximum of 90 g VOC/L. The limit value is 500 g VOC/L (cat. A/i).

Did you know? You can try the product before you buy it. Order small 5ml sample sachet of WOCA Colour Oil, Black.

You can also choose between different colours.

product barcode 5708055010702

Specification


Sealant & Lacquer Specification
Coverage 10-12m²/L
Component Base One Component
Drying Time 6 hours
Sheen at 60C Roller
Application Tools Roller
Pack Size 2.5L
Colour Black

Guides & Downloads